a custom round dining table with 3 leaves

 

 we delivered this one recently

here it is on site

it is a 60" round with three 15" leaves, in cherry,

with an ebony and maple burl edge inlay ..

this photo shows the layout on the bottom of the table,

runners, stiffeners, and apron attachments.

the leaves, in the end, had center stiffeners not attached yet here

with the base and sub top attached

an ancestor of this table that we first made back

in about 2015 ,,,

cad and cut list

seating layout

a spalted maple breakfast table

 

 

we recently sent this spalted maple breakfast table off to its new home in florida

it is about 27 x 62 and features one of our waterjet cut 

solid steel bases ... 

 

 

we made a quick mdf mockup on the cnc, got the client's approval

                                    and sent the file off to mainly metals in bristol, vt to be cut

the slab had been a coffee table that i made for a show, but when the client came to visit he decided it would make a perfect breakfast table for his banquet

good to go

is it october already?

 well, here we are.  it's fall, and i see i haven't written anything since

the middle of the summer ... it might have something to do with the weather 

and my golf and paddle tennis schedule .. lots of both, 

but still Kristian and i are still getting lots of stuff out the door ... 

below is a quick review of the last couple months ...

shortly after we completed the live edge table in the previous post,

the clients came with another slab from berkshire products, and another idea

the slab itself had some unusual bug damaged sections that the clients liked

that we decide to incorporate into the base for the breakfast table

a bit of a challenge, but successful we thought in the end

 

and, next up, a 60" round cherry table with three 15" leaves

a little flare on the inlay from the sunlight coming in the door

we have made this design many times in the past, but this is 

the first time we made it with a moveable base as the table opens

in some ways simpler, and more stable

a little 'burl and bars' edge inlay to dress it up a bit

coincidentally, this remodel was to a house that we made furniture for

when this dining room was added on about 20 years ago ... those clients have 

taken their furniture, and moved 'downtown' to the center of dorset ...

next we squeezed in some smaller things ... 

a couple of bedside tables ...

cherry and curly maple, part of a series of smaller tables shown on our website

upper left corner there

and then a reclaimed chestnut 'kitchen desk'

legs and color to match a dining table that we made in 2007

 in the adjacent room 

and below is one we finished last week 

a spalted maple breakfast table, that at one time was a coffee table 

that we made for a show and had managed to return to my office

where this client spotted it and had us make it into table for

a banquet in his new florida home.

solid 1" steel wishbone base waterjetted by mainly metals in bristol, vermont 

and sanded and drilled, tapped and polished by kritsian

 

and finally, this base for a super bronze eagle sculpture by 

walt matia, of curlew castings in maryland ... walt is sort of

world famous sculptor who has been a friend and fellow artist

since the early 80's

a couple of challenges:

* it had to be rugged as the sculpture weighs 150-200 pounds

* the inside had to accessible to bolt it to the floor on site and to bolt the sculpture to the base

* it had to be dark and 'not too shiny'

 

the sculpture this base will hold will a 'cut down' edition of this one

a photo shopped 'installation

if you've been to houston, you may have seen some of his bulls at the stadium there

 

i am sure i have missed a couple of other projects, but it is sunday

and time to go do some pottery ...